Loading products…
Loading products…
Product database
Compare named cooling products using published specifications, duty-condition caveats, compatibility questions, and the original supplier evidence.
Use this section to decide
What duty point and redundancy state sit behind the headline capacity?
Which servers, fluids, temperatures, and facility interfaces are supported?
What has the supplier not disclosed that must be resolved before a bid?
Featured records first, then the section's own editorial order.
An in-rack two-phase direct-to-chip cooling system demonstrated in co-innovation and high-density data-center environments.
Supplier reported5 of 12 required fields addressedReviewed Aug. 9, 2026
Project sourcing
Tell us the capacity, location, and timing once. We'll reply within one working day with suppliers that fit. It is free for buyers.
Get a supplier shortlistA coolant distribution platform built from blocks under one set of controls, tested in combinations up to 14 MW.
Supplier reported2 of 12 required fields addressedReviewed Aug. 9, 2026
A 250 kW in-row, multi-rack unit for the NeuCool two-phase direct-to-chip platform.
Supplier reported3 of 12 required fields addressedReviewed Aug. 9, 2026
An air-cooled chiller range from 800 kW to 2 MW on low-global-warming refrigerant, validated to 55°C ambient.
Supplier reported3 of 8 required fields addressedReviewed Sept. 4, 2026
A containerised dry cooler in 500 kW and 1,000 kW modules, offered with plate heat exchangers to separate the loops.
Supplier reported3 of 8 required fields addressedReviewed Sept. 4, 2026
A pipe-mounted water or glycol pump family spanning large data-center plant duties up to 28,000 US gpm.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A smaller pipe-mounted pump family for water or glycol service, published up to 2,500 US gpm and 300 feet of head.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A single-phase immersion tank that pumps dielectric fluid past the hardware, rated at 60 kW of heat over 12U of immersed space.
Independently reported3 of 8 required fields addressedReviewed Sept. 4, 2026
A closed-loop heat-rejection unit combining dry, evaporative, and combined operating modes.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A factory-built dry cooler published at up to 10,000 MBH for water-constrained critical-cooling plants.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A 2-inch electronic pressure-independent control valve with adjustable flow and building-network connectivity.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A 2-inch, 100 gpm pressure-independent control valve with flow, temperature, energy and networked control functions.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A heat-transfer fluid marketed for direct-to-chip and heat-exchange cooling in high-performance-computing systems.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A dielectric heat-transfer fluid validated for 18 months in an Iceotope MicroDC system with HPE servers and NVIDIA A40 GPUs.
Supplier reported4 of 8 required fields addressedReviewed Oct. 4, 2026
An in-row coolant distribution unit rated at 2 MW with a 3°C approach, built to the fifth-generation Project Deschutes shape.
Supplier reported8 of 12 required fields addressedReviewed Sept. 4, 2026
A coolant distribution unit rated at 1,350 kW with a 4°C approach, offered with a heat exchanger that narrows the approach to 2°C.
Supplier reported6 of 12 required fields addressedReviewed Sept. 4, 2026
A synthetic-hydrocarbon, single-phase dielectric coolant with published thermal, electrical, cleanliness, and low-temperature properties.
Supplier reported4 of 8 required fields addressedReviewed Oct. 4, 2026
A synthetic-hydrocarbon single-phase immersion fluid with a published 5.1 mm²/s kinematic viscosity at 40°C.
Supplier reported4 of 8 required fields addressedReviewed Oct. 4, 2026
A coolant distribution unit that holds the server loop below atmospheric pressure, rated at 300 kW with a 7°C approach.
Supplier reported7 of 12 required fields addressedReviewed Sept. 4, 2026
A single-phase direct-liquid-cooling cold plate demonstrated for processors with heat loads up to 4,000 watts.
Supplier reported4 of 8 required fields addressedReviewed Aug. 9, 2026
A 1/8-inch-flow stainless-steel dry-break coupling designed around the OCP universal quick-disconnect interface.
Supplier reported2 of 8 required fields addressedReviewed Oct. 4, 2026
A 1/2-inch-flow stainless-steel coupling set for rack-mounted blind-mate or in-line liquid-cooling connections.
Supplier reported2 of 8 required fields addressedReviewed Oct. 4, 2026
A coolant distribution unit in 400 kW, 1,000 kW and 2,000 kW sizes, with an approach as narrow as 2 K and skids beyond 10 MW.
Supplier reported3 of 12 required fields addressedReviewed Sept. 4, 2026
Open Compute Project quick disconnects in four sizes, flat-face and double shut-off, every unit helium leak tested.
Supplier reported3 of 8 required fields addressedReviewed Sept. 4, 2026
A rack-format coolant distribution unit stated at 1.38 to 2.6 MW, with a single pump reaching 3,333 liters per minute.
Supplier reported7 of 12 required fields addressedReviewed Sept. 4, 2026
A liquid-to-liquid coolant distribution unit rated at 1,000 kW with a 5°C approach and 1,000 liters per minute in the server loop.
Supplier reported7 of 12 required fields addressedReviewed Sept. 4, 2026
A combined chemistry, sensing, control, analytics, and service program for cooling towers, chillers, and other facility-water systems.
Supplier reported2 of 8 required fields addressedReviewed Oct. 4, 2026
A data-center program using controllers, flow meters, conductivity sensing, centralized dosing, and remote alarm response for adiabatic cooling units.
Supplier reported2 of 8 required fields addressedReviewed Oct. 4, 2026
A factory-assembled, CTI-certified dry cooler published at 9,060 to 11,490 MBH nominal heat rejection.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A factory-assembled V-coil dry cooler published from 2,750 to 8,440 MBH nominal heat rejection.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A modular immersion system, in use at universities, energy companies, research computing sites, and ordinary enterprises.
Supplier reported4 of 8 required fields addressedReviewed Aug. 9, 2026
A compact split-coupled vertical pump used for chilled-water and condenser-water service at hyperscale data centers.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A variable-speed end-suction pump configuration documented in Digital Realty's dock-water cooling system at Cloud House.
Supplier reported4 of 8 required fields addressedReviewed Oct. 4, 2026
A low-profile configurable dry cooler for projects constrained by equipment height.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A configurable V-shaped outdoor dry cooler with published fluid ranges up to 2,040 kW and optional adiabatic pre-cooling.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A 5U server holding eight accelerators, offered with direct liquid cooling for the processors, accelerators and switches.
Supplier reported2 of 8 required fields addressedReviewed Sept. 4, 2026
A sealed eight-GPU server cooled by dielectric fluid inside the chassis, with no server fans in the airflow path.
Supplier reported4 of 8 required fields addressedReviewed Sept. 4, 2026
A sealed cold-plate loop and radiator built into a 2U Dell server, rated to 1,500 W and needing no facility water.
Supplier reported4 of 8 required fields addressedReviewed Sept. 4, 2026
A centralised coolant distribution skid, delivered in 4 MW and 9 MW sizes for one 200 MW data center phase.
Supplier reported2 of 12 required fields addressedReviewed Sept. 4, 2026
A family of corrosion inhibitors, hardness stabilizers, and antifreeze treatments for closed cooling and chilled-water systems.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A modular analyzer and controller platform for cooling-tower water quality, active-treatment concentration, alarms, and dosing control.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A 13U enclosure holding eight water-cooled trays, taking inlet water up to 45°C and reaching 162 kW across three units in a rack.
Supplier reported4 of 8 required fields addressedReviewed Sept. 4, 2026
A high-capacity CDU used in direct-to-chip and hybrid liquid-cooling architectures.
Supplier reported4 of 12 required fields addressedReviewed Aug. 9, 2026
A coolant distribution unit rated at 600 kW with a 4°C approach at 600 liters per minute, in a 900 mm cabinet.
Supplier reported6 of 12 required fields addressedReviewed Sept. 4, 2026
An inverter-screw air-cooled chiller identified by Climaveneta for elevated-water-temperature data-center duty.
Supplier reported4 of 8 required fields addressedReviewed Oct. 4, 2026
A data-center air-cooled chiller with oil-free centrifugal compressors and total, hybrid, and mechanical cooling modes.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A built-in-inverter centrifugal chiller range using HFO-1233zd(E), published from 150 to 700 refrigeration tons.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A constant- or variable-speed centrifugal chiller range using HFO-1234ze(E), published from 300 to 5,000 refrigeration tons.
Supplier reported4 of 8 required fields addressedReviewed Oct. 4, 2026
A single-phase immersion tank stated to dissipate up to 150 kW across 50U of immersed hardware, holding 1,666 liters of fluid.
Supplier reported4 of 8 required fields addressedReviewed Sept. 4, 2026
An evaporative fluid cooler that keeps water or water-glycol process fluid inside a smooth-tube coil.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
An active rear-door heat exchanger designed to capture rack heat while preserving conventional server form factors.
Supplier reported4 of 8 required fields addressedReviewed Aug. 9, 2026
A thermosyphon economiser rated at 250 kW that moves heat to outside air without pumps and without using water.
Supplier reported3 of 8 required fields addressedReviewed Sept. 4, 2026
A coolant distribution unit stated above 800 kW at a 6 K approach, using magnetically coupled pumps with no shaft seal to leak.
Supplier reported7 of 12 required fields addressedReviewed Sept. 4, 2026
A pleated depth-filter family with published particle-removal grades for resin-trap, pre-RO, and cooling-water service.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
An ASME-coded housing family for Ultipleat cartridges in large-flow cooling-water and pre-reverse-osmosis applications.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A welded 316-stainless distribution header with as many as 20 individually valved outlets for liquid and other industrial-fluid service.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A shorter, lighter HPAHM variant with up to 20 valved outlets for space-constrained fluid-distribution assemblies.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A liquid-to-liquid coolant distribution unit for an Open Rack v3 footprint, stated at 1,000 kW at 4 K and 1,500 kW at 6 K.
Supplier reported6 of 12 required fields addressedReviewed Sept. 4, 2026
A compact programmable HVAC controller with 16 onboard inputs and outputs, BACnet connectivity, and optional field-device integration.
Supplier reported2 of 8 required fields addressedReviewed Oct. 4, 2026
A data-center control platform that uses dense wireless sensing and predictive software to match room cooling to real-time IT load.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A butterfly valve offered for cooling loops, rated to 285 psi at end of line, for immersion units, chillers and pump skids.
Independently reported5 of 8 required fields addressedReviewed Sept. 4, 2026
An oil-free, multi-compressor water-cooled chiller family published in capacities from 45 to 1,600 refrigeration tons.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A large oil-free water-cooled chiller family published from 300 to 3,600 refrigeration tons.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A flush-face, non-spill metal coupling family used for hot-swappable liquid-cooled computing blades.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
An OCP-oriented automatic coupling family for rack hoses, blade distribution and blind-mate server connections.
Supplier reported2 of 8 required fields addressedReviewed Oct. 4, 2026
STULZ's first liquid cooling product, a coolant distribution unit rated from 345 to 1,380 kW at 32°C facility water.
Supplier reported4 of 12 required fields addressedReviewed Sept. 4, 2026
An immersion platform for dense racks, built from modular tanks.
Supplier reported3 of 8 required fields addressedReviewed Aug. 9, 2026
A 4U in-rack coolant distribution unit rated to 250 kW on water as warm as 45°C, part of the DLC-2 stack.
Supplier reported5 of 12 required fields addressedReviewed Sept. 4, 2026
A large brazed plate heat exchanger used as a loop separator in data-center free-cooling systems.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A DN150-port brazed plate heat exchanger documented in data-center free-cooling and large energy-transfer duties.
Supplier reported4 of 8 required fields addressedReviewed Oct. 4, 2026
A forced-draft, open-circuit evaporative tower documented in a 16-unit data-center heat-rejection installation.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
An active water-cooled rear door rated at 93 kW with 14°C inlet water for medium- and high-density racks.
Supplier reported2 of 8 required fields addressedReviewed Oct. 4, 2026
An active rear-door cooler for HPC racks, published at 200 kW and reported at 204 kW with 14°C inlet water.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A gasket-free plate-and-shell heat-exchanger size with a published 8 to 550 square meter heat-transfer-area range.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A larger gasket-free plate-and-shell size with a published 15 to 1,000 square meter heat-transfer-area range.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A phosphorus-free chemistry program for scale and corrosion control in open recirculating cooling-water systems.
Supplier reported3 of 8 required fields addressedReviewed Oct. 4, 2026
A cooling-water controller for pH, oxidation-reduction potential, conductivity, and supported chemical-level monitoring.
Supplier reported2 of 8 required fields addressedReviewed Oct. 4, 2026
A coolant distribution unit that transfers heat between two water loops, rated at about 1.35 MW.
Supplier reported2 of 12 required fields addressedReviewed Aug. 9, 2026
A friction-stir-welded standard cold plate with a 20-fins-per-inch MDT pin-fin field and three thermal-interface zones.
Supplier reported2 of 8 required fields addressedReviewed Oct. 4, 2026
A larger multi-zone MDT pin-fin cold plate drawing with a 321 by 150 mm envelope and SAE -6 ports.
Supplier reported2 of 8 required fields addressedReviewed Oct. 4, 2026
A hydrovar X-enabled end-suction pump family promoted for high-flow data-center chilled-water systems.
Supplier reported2 of 8 required fields addressedReviewed Oct. 4, 2026
A compact vertical multistage pump family that Xylem lists for data-center applications requiring higher head.
Supplier reported2 of 8 required fields addressedReviewed Oct. 4, 2026
A closed-loop, facility-water-free sidecar designed to cool up to two 120 kW racks in existing air-cooled facilities.
Supplier reported4 of 12 required fields addressedReviewed Aug. 9, 2026